Which kind of XY Finder do I have?

This is a quick guide to help you discover which model of XY Finder you're using. If you have any questions, please contact XY Findables support here.

 


 

XY1 and XY2

XY2.png

XY1 and XY2 units have a matte, rubberized finish. An XY logo is on the front but these models don't have a button. If the unit has never been used before, it will have a yellow battery tab that keeps the XY Finder from turning on.

Most units that look like this are XY2. If you purchased your XY Finder recently, chances are it's XY2.

Colors: Snow White, Onyx Black, Silver Gray, Jade Green, Crystal Clear, Amethyst Purple, Aquamarine Blue, Ruby Red

 


 

XY3.0

XY3.0.png

XY3.0 has a scored, triangular button with the XY logo on the front. On the back, there's one small sound system hole on the right side (with the key ring hole pointed upward).

Colors: Snow White, Onyx Black, Silver Gray, Jade Green, Citrine Orange, Amethyst Purple, Aquamarine Blue, Ruby Red

 


 

XY3.1 

XY3.1.png

XY3.1 has a raised, rubberized 90 degree angle on the button, which is inscribed with an XY logo. On the back, in the center, are three tiny, pin-sized holes.

Colors: Snow White, Onyx Black, Silver Gray, Jade Green, Citrine Orange, Amethyst Purple, Aquamarine Blue, Ruby Red

 


 
XY4+

XY4.png

XY4+ has a button that's a seperate piece inset into the body of the finder. On the back, there are four tiny pinholes in the center and a number 4 set into a circle. It's 18% larger than earlier models.

Colors: White, Charcoal, Green, Yellow, Pink, Blue, Purple, Red

 


 

XYGPS

XYGPS.png

XYGPS is larger than the other models of XY Finder; it's about the size of a large pocket watch. On the front is a black button that lights up when the finder is charged, and on the back are screw holes under a black information sticker with white text fitted to the finder.

Colors: Carmine Red, Cobalt Blue, Carbon Black, Chromium Silver

 

Was this article helpful?
7 out of 9 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.